Thank to the rapid development of technology, breakthroughs in cutting have been made. Water cutting is widely used in stone, metal, glass, ceramic cutting and other fields.Among them, GANET stands out. Reasonable cutting cost, high cutting precision and wide cutting range. Its excellent characteri Read More

In terms of quality, abrasive garnet abrasive (red/pink garnet) is much better than slag. In addition, it is safe as it has no health issues like silica sand. Due to these benefits, SEPPE Garnet is now the preferred blasting media. As abrasive garnet is crushed from hard rock, it will be of higher d Read More

Waterjet cutting, that is, high-pressure water jet cutting technology, starts from the pressure pump, passes through the high-pressure pipe, and then shoots out from the cutting nozzle. Under the control of the computer, the workpiece can be arbitrarily carved, which is less affected by the material Read More

Garnet sand, as a water filtration material, has many advantages, such as corrosion resistance, wear resistance, and good compression resistance. It is an ideal type of water filtration material. Due to its large specific gravity, it can withstand large water buoyancy and high-strength stamping abil Read More

SEPPE garnet sandblasting abrasive has high hardness, long lifetime, high efficiency, low consumption and high recycling rate.In the process of surface preparation, SEPPE garnet is blasted on to the surface of the steel with the use of high pressure compressed air. This process is called sand blasti Read More

In terms of quality, abrasive garnet abrasive (red/pink garnet) is much better than slag. In addition, it is safe as it has no health issues like silica sand. Due to these benefits, SEPPE Garnet is now the preferred blasting media. As abrasive garnet is crushed from hard rock, it will be of higher d Read More

Garnet sand is an environment-friendly abrasive because it does not contain free silicon and will not cause occupational harm to the body of sandblasting workers. Most importantly, due to the high hardness of garnet sand, if there is a good recovery system, it can be reused for many times. Read More

The SEPPE garnet abrasive sand under the microscope has sharp edges and corners, and the multi-channel water washing and magnetic separation process ensures high purity and low impurities of SEPPE garnet.The advantages of non-toxic, odorless, and non radioactive, environmentally friendly and healthy Read More

"The conventional methods of forming and cutting, such as nibbling, routing, sawing, grinding, and the like, have become extremely time-consuming, difficult and expensive, with no one such method being solely capable of satisfactorily producing a finished production part by itself."The dynamic water Read More

Garnet is a hard mineral typically rated between 7.0 and 7.5 on the Mohs scale (where a diamond is 10 and talcum powder is 1). Also, well washed garnet abrasive does not produce a lot of dust when cutting like other processes might. Garnet is also relatively chemically inert and will not react with Read More