Technically yes. Waterjet garnet will remove rust and paint. But whether it’s the right choice depends on what you’re blasting and how you measure productivity. In this articleWhat’s the Difference Between Waterjet Garnet and Blasting Garnet?What Happens When You Use Waterjet Garnet for Blasting?Whe Read More

Table of ContentsCore Source DifferenceChloride Content & Coating ComplianceDust Generation & Site PerformanceApplication Suitability NoteReuse Cycles & Operating CostFinal NoteIf you run a sandblasting operation for shipyards, steel fabricators or pipeline projects, you’ve likely asked: Is premium Read More

For sandblasting, many cheap abrasives put your workers at risk. Silica sand contains free silica—a known cause of silicosis. Copper slag and coal slag often carry heavy metals. Their dust lingers in the air, settles on equipment, and threatens lung health day after day. Read More

Industry data shows that up to 80% of coating failures result from inadequate surface preparation. Often, the root cause is the wrong choice of abrasive.Low-purity abrasives such as copper slag or coal slag contain residual heavy metals, high levels of soluble salts, and irregular particle shapes. I Read More

Rust is a porous and loose substance, which is very common in life. The more common rust removal method is sandblasting. If the iron parts are not sandblasted for a long time, the iron matrix will be deformed due to the development and expansion of rust, resulting in cracks and inflow of water, corr Read More