A waterjet can be seen as an accelerated, controlled erosion process. A pure water waterjet (one without abrasives) is ideal for very soft materials such as rubber, foam, or food products. When abrasive is added, virtually anything can be cut or eroded away. By adding abrasive, you can greatly enhan Read More

Once SEPPE Garnet Abrasive is added to high-pressure streams of water, it is capable of cutting through rough articles including steel, stone, and aluminum. Even as sensitive material as the glass can be safely cut with no fracturing.Some of the most significant privileges of WaterJet cutting includ Read More

Always keep the working environment free of dust and debris. Especially in the case of waterjets as they are operated in an environment filled with garnet abrasives. So, you have to be cautious about keeping everything clean as much as you can. This will significantly reduce your repair and maintena Read More

Many factors determine a good abrasive, and the advantage of using a high-quality abrasive is that you will get faster cutting, higher precision, and less frequent nozzle plugging.1)Double SiftedFine particles and large particles both contribute to nozzle plugging, inefficient cutting, and other pro Read More

Garnet has been used for decades as an abrasive in waterjet cutting and sand blasting because of its superior physical properties. When added to high pressure streams of water, garnet abrasive is capable of cutting through tough materials including steel, aluminum, stone, and Inconel.With the variet Read More

SEPPE's Garnet grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removing all rust, soluble salts and other contaminations. The blasted surface is free of embedment and free of rogue peaks and troughs. SA3 White Metal is effortlessly achieved. A surface profile Read More