Waterjet cutting is known for its versatility and ability to cut through almost any material. The water jet is delivered at incredibly high pressure and is mixed with an abrasive garnet. This is enough to easily cut through most materials, even significant depths of metals such as steel, however a f Read More

In terms of quality, abrasive garnet abrasive (red/pink garnet) is much better than slag. In addition, it is safe as it has no health issues like silica sand. Due to these benefits, SEPPE Garnet is now the preferred blasting media. As abrasive garnet is crushed from hard rock, it will be of higher d Read More

Garnet sand is an environment-friendly abrasive because it does not contain free silicon and will not cause occupational harm to the body of sandblasting workers. Most importantly, due to the high hardness of garnet sand, if there is a good recovery system, it can be reused for many times. Read More

The SEPPE garnet abrasive sand under the microscope has sharp edges and corners, and the multi-channel water washing and magnetic separation process ensures high purity and low impurities of SEPPE garnet.The advantages of non-toxic, odorless, and non radioactive, environmentally friendly and healthy Read More

"The conventional methods of forming and cutting, such as nibbling, routing, sawing, grinding, and the like, have become extremely time-consuming, difficult and expensive, with no one such method being solely capable of satisfactorily producing a finished production part by itself."The dynamic water Read More

Garnet is a hard mineral typically rated between 7.0 and 7.5 on the Mohs scale (where a diamond is 10 and talcum powder is 1). Also, well washed garnet abrasive does not produce a lot of dust when cutting like other processes might. Garnet is also relatively chemically inert and will not react with Read More

1. Observing the color, the main colors of garnet sand are pink, light red, and deep red, with the redder the better. You can also rub it with your hands to observe the degree of weathering of garnet sand. Generally, good garnet sand has high hardness and is not easy to pulverize.2. Take an equal am Read More

SEPPE garnet is our fast cleaning, general purpose abrasive for a wide variety of less challenging industrial blasting requirements. It offers exceptionally fast blasting performance for removal of light to medium coatings and/or rust. It outperforms other abrasives due to its hardness, low consumpt Read More

There is a relation between the cutting speed and the garnet mesh. Bigger mesh garnet abrasive can make the cutting process slightly faster. However, you will get a rough finish. The most commonly chosen option for waterjet cutting is 80 mesh SEPPE garnet abrasive. The garnet abrasive size does not Read More

SEPPE offers the most comprehensive line of sandblast cleaning and waterjet cutting abrasives. All the abrasives we offer for blast cleaning are considered“silica free”, greatly reducing the health risk to operators.Our abrasives are also used for polishing, finishing, grinding, de-burring, peeninga Read More