Reason 1: Adding too much sand resulted in blockage and inability to pressurize.Solution: The amount of sand added should be appropriate and not too much.Reason 2: The spray gun is blocked.Solution: After stopping the gas flow, remove the nozzle and check for any foreign objects. If there are any fo Read More

Sa0: Steel surface without rust removal treatment.Sa1: Mild sandblasting to remove loose black skin, floating rust, and foreign objects.Sa 2: Moderate sandblasting removes most of the black skin, rust, and external foreign objects, resulting in a metallic gray surface after treatment. It is suitable Read More

The selection of surface treatment methods and equipment should consider the following factors:1. What is the degree of surface damage;2. Which equipment is suitable for;3. What type of paint kit is it;4. How about the surface structure;5. What type of paint is used for construction;6. What are the Read More

Many factors determine a good abrasive, and the advantage of using a high-quality abrasive is that you will get faster cutting, higher precision, and less frequent nozzle plugging.1)Double SiftedFine particles and large particles both contribute to nozzle plugging, inefficient cutting, and other pro Read More

SEPPE's Garnet grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removing all rust, soluble salts and other contaminations. The blasted surface is free of embedment and free of rogue peaks and troughs. SA3 White Metal is effortlessly achieved. A surface profile Read More

Garnet is one of the very best abrasive options for many blast shop operations.Traditional abrasive blasting media are one-dimensional, typically made of either coarse or fine grains. Compared to conventional abrasives,garnet has the advantage of High Speed, very Low Dust and the lowest Consumption Read More

In sandblasting, an important indicator that is often detected is electrical conductivity, that is, the electrical conductivity of the object. This is to detect the soluble salt content of the object after blasting. Soluble salts are a potential threat to objects being blasted. It affects the coatab Read More