In terms of quality, abrasive garnet abrasive (red/pink garnet) is much better than slag. In addition, it is safe as it has no health issues like silica sand. Due to these benefits, SEPPE Garnet is now the preferred blasting media. As abrasive garnet is crushed from hard rock, it will be of higher d Read More

Garnet sand is an environment-friendly abrasive because it does not contain free silicon and will not cause occupational harm to the body of sandblasting workers. Most importantly, due to the high hardness of garnet sand, if there is a good recovery system, it can be reused for many times. Read More

The SEPPE garnet abrasive sand under the microscope has sharp edges and corners, and the multi-channel water washing and magnetic separation process ensures high purity and low impurities of SEPPE garnet.The advantages of non-toxic, odorless, and non radioactive, environmentally friendly and healthy Read More

1. Observing the color, the main colors of garnet sand are pink, light red, and deep red, with the redder the better. You can also rub it with your hands to observe the degree of weathering of garnet sand. Generally, good garnet sand has high hardness and is not easy to pulverize.2. Take an equal am Read More

There is a relation between the cutting speed and the garnet mesh. Bigger mesh garnet abrasive can make the cutting process slightly faster. However, you will get a rough finish. The most commonly chosen option for waterjet cutting is 80 mesh SEPPE garnet abrasive. The garnet abrasive size does not Read More

SEPPE offers the most comprehensive line of sandblast cleaning and waterjet cutting abrasives. All the abrasives we offer for blast cleaning are considered“silica free”, greatly reducing the health risk to operators.Our abrasives are also used for polishing, finishing, grinding, de-burring, peeninga Read More

SEPPE GARNET IS MOST COMMON ABRASIVE USED FOR WATER JET CUTTING Pure waterjets cut soft materials such as food, carpet, foam and rubber,but when you are cutting harder materials such as metal or stone, an abrasive must be added, and it's the abrasive that actually does the cutting. That is why abra Read More

Virtually every abrasive known to man — both natural and synthetic — has been considered for use in waterjet cutting. Almandine garnet has emerged as the mineral with the best characteristics for abrasive waterjet. Other minerals may be harder, heavier or lower in cost, but almandine garnet is the a Read More

The garnet sand is using for garnet sandblasting. SEPPE is one of the largest manufacturers, supplier, and exporter of abrasive garnet, 20-40 mesh garnet, 30-60 Mesh, 80 Mesh, 120 Mesh size. We offer the garnet abrasive media for sand blasting machine applications. We magnetize garnet and remove all Read More