Wondering how a material like steel can be cut with just the pressure of water? Well to surprise you, waterjet cutting pressure can range from 30,000 to 90,000 PSI which can pierce a material like steel easily.Waterjet cutting can be used to cut steel in a variety of thicknesses, from thin sheet met Read More

The garnet sand is using for garnet sandblasting. SEPPE is one of the largest manufacturers, supplier, and exporter of abrasive garnet, 20-40 mesh garnet, 30-60 Mesh, 80 Mesh, 120 Mesh size. We offer the garnet abrasive media for sand blasting machine applications. We magnetize garnet and remove all Read More

How to help ensure maximum blasting performanceAbrasive blasting is a complex process with numerous variables that impact performance. Every blasting application is unique. Proper planning, close monitoring, occasional adjustments, and recycling as appropriate are necessary to create a safe, efficie Read More

SEPPE Garnet Abrasive is very fast cutting due to the large number, speed, and shape of grains impacting on the surface. The acceleration and speed of grain in an airstream is a function of the inertia and hence the size of the grain. Smaller grains accelerate much more readily, thus imparting highe Read More

Water jet cutting does not damage the edge being cut, there is no heat created, no microabrasions. The remaining material, from which the part was cut, is still all good to be used, there is not an issue of having to discard some of it.The water jet cutting nozzles are highly accurate and incredibly Read More

1.Guaranteed PurityWith our unmatched processing, each batch contains highly accurately sized grains of the highest quality almandine garnet.Uncontaminated garnet enables faster cutting and cleaner cuts.2.Higher Quality CutSEPPE’s waterjet abrasives’ unique grain hardness, density and toughness ensu Read More

Do more with SEPPE in less time. Reduce your costs with lower consumption, higher production rates, and shorter project times.Not all garnets are the same hardness – almandine garnet is the only one that professionals can use industrially. This is because softer garnets and other minerals shatter on Read More

Both shot blasting and sandblasting use high-pressure air or compressed air as the power to blow it out at high speed and impact the surface of the workpiece to achieve cleaning effect, but the effect varies depending on the medium chosen.The main differences between shot blasting and sandblasting a Read More

A waterjet can be seen as an accelerated, controlled erosion process. A pure water waterjet (one without abrasives) is ideal for very soft materials such as rubber, foam, or food products. When abrasive is added, virtually anything can be cut or eroded away. By adding abrasive, you can greatly enhan Read More

Reason 1: Adding too much sand resulted in blockage and inability to pressurize.Solution: The amount of sand added should be appropriate and not too much.Reason 2: The spray gun is blocked.Solution: After stopping the gas flow, remove the nozzle and check for any foreign objects. If there are any fo Read More