When garnet sand is used for sandblasting, it can reach the highest cleaning level, which can greatly prolong the life of sandblasting surface coating, and there is almost no dust in the process of operation, which will not pollute the environment and affect the health of workers.By the impact of hi Read More

Garnet sand, as a water filtration material, has many advantages, such as corrosion resistance, wear resistance, and good compression resistance. It is an ideal type of water filtration material. Due to its large specific gravity, it can withstand large water buoyancy and high-strength stamping abil Read More

Wondering how a material like steel can be cut with just the pressure of water? Well to surprise you, waterjet cutting pressure can range from 30,000 to 90,000 PSI which can pierce a material like steel easily.Waterjet cutting can be used to cut steel in a variety of thicknesses, from thin sheet met Read More

SEPPE Garnet Abrasive is very fast cutting due to the large number, speed, and shape of grains impacting on the surface. The acceleration and speed of grain in an airstream is a function of the inertia and hence the size of the grain. Smaller grains accelerate much more readily, thus imparting highe Read More

Reason 1: Adding too much sand resulted in blockage and inability to pressurize.Solution: The amount of sand added should be appropriate and not too much.Reason 2: The spray gun is blocked.Solution: After stopping the gas flow, remove the nozzle and check for any foreign objects. If there are any fo Read More

1. SEPPE Alluvial Pink Garnet comes from the fresh water riverbed and has the characteristics of low dust, high definition and significant ratio. Dust can be greatly reduced during sand blasting, and the harm to the environment and operators can be reduced.2. SGA garnet has a broad customer base an Read More

Many water cutting manufacturers will have the phenomenon of sand pipe plug in the operation process, which is caused by the uncleanness of garnet sand. If the garnet sand cleaning process is not up to the standard, the dust and soil in the sand will tend to solidify into a mass once it is damp, whi Read More

Although garnet sand is a necessary abrasive for sand blasting, its requirements are very high, and the chloride content of garnet sand is an important item. Why? First, let's see what chloride is. Chloride is a salt compound formed by the combination of negatively charged chloride ions and positive Read More

Read More