1.Guaranteed PurityWith our unmatched processing, each batch contains highly accurately sized grains of the highest quality almandine garnet.Uncontaminated garnet enables faster cutting and cleaner cuts.2.Higher Quality CutSEPPE’s waterjet abrasives’ unique grain hardness, density and toughness ensu Read More

Do more with SEPPE in less time. Reduce your costs with lower consumption, higher production rates, and shorter project times.Not all garnets are the same hardness – almandine garnet is the only one that professionals can use industrially. This is because softer garnets and other minerals shatter on Read More

Both shot blasting and sandblasting use high-pressure air or compressed air as the power to blow it out at high speed and impact the surface of the workpiece to achieve cleaning effect, but the effect varies depending on the medium chosen.The main differences between shot blasting and sandblasting a Read More

A waterjet can be seen as an accelerated, controlled erosion process. A pure water waterjet (one without abrasives) is ideal for very soft materials such as rubber, foam, or food products. When abrasive is added, virtually anything can be cut or eroded away. By adding abrasive, you can greatly enhan Read More

Reason 1: Adding too much sand resulted in blockage and inability to pressurize.Solution: The amount of sand added should be appropriate and not too much.Reason 2: The spray gun is blocked.Solution: After stopping the gas flow, remove the nozzle and check for any foreign objects. If there are any fo Read More

Sa0: Steel surface without rust removal treatment.Sa1: Mild sandblasting to remove loose black skin, floating rust, and foreign objects.Sa 2: Moderate sandblasting removes most of the black skin, rust, and external foreign objects, resulting in a metallic gray surface after treatment. It is suitable Read More

Once SEPPE Garnet Abrasive is added to high-pressure streams of water, it is capable of cutting through rough articles including steel, stone, and aluminum. Even as sensitive material as the glass can be safely cut with no fracturing.Some of the most significant privileges of WaterJet cutting includ Read More

Many factors determine a good abrasive, and the advantage of using a high-quality abrasive is that you will get faster cutting, higher precision, and less frequent nozzle plugging.1)Double SiftedFine particles and large particles both contribute to nozzle plugging, inefficient cutting, and other pro Read More

Garnet has been used for decades as an abrasive in waterjet cutting and sand blasting because of its superior physical properties. When added to high pressure streams of water, garnet abrasive is capable of cutting through tough materials including steel, aluminum, stone, and Inconel.With the variet Read More

SEPPE's Garnet grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removing all rust, soluble salts and other contaminations. The blasted surface is free of embedment and free of rogue peaks and troughs. SA3 White Metal is effortlessly achieved. A surface profile Read More