Learn how to assess rusted steel, choose between SGA 20/40 and SGA 30/60, set a trial blast and verify cleanliness and surface profile before coating. Read More

Working with multiple materials—stainless steel, aluminum, carbon steel, or ship hulls—requires more than a one‑size‑fits‑all abrasive. Using the wrong mesh can ruin your surface, reduce coating adhesion, or waste time and money. This guide helps you match the right garnet mesh to your material. 1. Read More

In terms of quality, abrasive garnet abrasive (red/pink garnet) is much better than slag. In addition, it is safe as it has no health issues like silica sand. Due to these benefits, SEPPE Garnet is now the preferred blasting media. As abrasive garnet is crushed from hard rock, it will be of higher d Read More

Garnet sand is an environment-friendly abrasive because it does not contain free silicon and will not cause occupational harm to the body of sandblasting workers. Most importantly, due to the high hardness of garnet sand, if there is a good recovery system, it can be reused for many times. Read More

Garnet is now widely used in various industries. There are some abrasives are also more common such as emery, quartz sand, brown corundum, etc. Then we will briefly analyze these common abrasives.1. Garnet is a natural mineral processed abrasive, which is more widely used abroad. Compared with other Read More

Garnet sand as a kind of natural abrasive, always be used in waterjet cutting. But the particle size will greatly affect the efficiency and quality of cutting.1. When large-particle water jet sand is used for cutting, the cutting surface is rough, the cutting gap is large, and the cutting precision Read More

Water jet cutting machines are widely used in the industry for their excellent cutting characteristics such as high precision and zero pollution. However, during the cutting process, some operators found that the cutting precision of the cutting machine would be slightly different. Many people It is Read More

In the field of sandblasting, garnet sandblasting abrasives are more and more favored by users, and the use of garnet sand is also increasing. There are many materials that can be used as sandblasting abrasives, in addition to garnet sand and quartz Sand, brown corundum, glass beads, copper slag Read More

1. The humidity of the air. When the relative humidity in the air reaches 85% or the surface temperature of the sandblasted object is less than 3 degrees Celsius, the sandblasting operation should be stopped. Once it gets wet, it will lose its effectiveness. Read More