SEPPE Garnet abrasive is a high-quality sandblasting abrasive, belonging to non-metallic natural diamond sand. The advantages of sandblasting are as follows:1) Free from harmful substances such as free iron, free silicon, and heavy metals, it does not affect health and effectively prevents the occur Read More

The advantages of water cutting garnet abrasive (Garnet) mainly include the following points:Environmental friendliness: Watercutting uses water as an auxiliary cutting medium, which reduces environmental pollution compared to traditional dry cutting methods and does not produce harmful gases or dus Read More

Alluvial garnet has lower dust, lower salt, lower chloride. Conductivity less than 15ms/m according to ASTM D4940-15. Read More

In the field of sandblasting, garnet sandblasting abrasives are more and more favored by users, and the use of garnet sand is also increasing. SEPPE takes great notice of both health and safety aspects. This healthy demand is a result of growing requirements for ultra high pressure cutting for steel Read More

Garnet sand, which is grinding from raw materials of garnet , has the characteristics of high hardness, high temperature resistance, stable chemical properties, uniform particles, high grinding efficiency and no scratch. Suitable for waterjet cutting industry; Various metal, plastic, wood and other Read More

In terms of quality, abrasive garnet abrasive (red/pink garnet) is much better than slag. In addition, it is safe as it has no health issues like silica sand. Due to these benefits, SEPPE Garnet is now the preferred blasting media. As abrasive garnet is crushed from hard rock, it will be of higher d Read More

The SEPPE garnet abrasive sand under the microscope has sharp edges and corners, and the multi-channel water washing and magnetic separation process ensures high purity and low impurities of SEPPE garnet.The advantages of non-toxic, odorless, and non radioactive, environmentally friendly and healthy Read More

SEPPE garnet sandblasting abrasive has high hardness, long lifetime, high efficiency, low consumption and high recycling rate.In the process of surface preparation, SEPPE garnet is blasted on to the surface of the steel with the use of high pressure compressed air. This process is called sand blasti Read More

"The conventional methods of forming and cutting, such as nibbling, routing, sawing, grinding, and the like, have become extremely time-consuming, difficult and expensive, with no one such method being solely capable of satisfactorily producing a finished production part by itself."The dynamic water Read More

Garnet is a hard mineral typically rated between 7.0 and 7.5 on the Mohs scale (where a diamond is 10 and talcum powder is 1). Also, well washed garnet abrasive does not produce a lot of dust when cutting like other processes might. Garnet is also relatively chemically inert and will not react with Read More