Many factors determine whether you’ll make the right cut, but none is more important than choosing the right abrasive.Abrasives : In most cases, post-processing of cutting edges is no longer required. A single waterjet cutting system can be used to cut all different types of steel.Less dust, more pr Read More

What is most important for choosing the right abrasives?Garnet is one of the very best abrasive options for many waterjet cutting shop operations. Some of the benefits like: High Speed, very Low Dust and the lowest Consumption rate compared to conventional abrasives highlight the advantageous of Gar Read More

SGA garnet sandblasting abrasive originates from the natural riverbed sand that has been washed 6 times in the production process, and the dust content is extremely low. At the same time, due to the large proportion of SGA garnet sandblasting abrasive and fast settling speed, there is less dust duri Read More

Garnet is a natural abrasive with relatively high hardness, which is widely used in water cutting and sandblasting industries. So can garnet abrasives be reused in water cutting?1. The garnet abrasive acts on the surface of the cutting object through a high-pressure jet flow. While cutting the objec Read More

Several ways to judge the quality of garnet abrasives. From four aspects. Read More

1） Not clean washing, or even not washingSome production and processing enterprises in order to save costs in the water washing process, the amount of water is not enough or the water quality is very poor, or even no water washing, resulting in high mud content of the abrasive.2） Insufficient magnet Read More

Garnet is now widely used in various industries. There are some abrasives are also more common such as emery, quartz sand, brown corundum, etc. Then we will briefly analyze these common abrasives.1. Garnet is a natural mineral processed abrasive, which is more widely used abroad. Compared with other Read More