As we all know, garnet is a natural mineral abrasive. And it is widely used in water cutting, sandblasting, and water filtration.Garnet has multiple sources, of which three are known: garnet deposits, beaches, and river channels. Due to their different sources, the hardness, purity, color, and impur Read More

When it comes to cutting materials with extreme precision and without heat, waterjet cutting is the technology of choice. And at the heart of this powerful process is a natural mineral: garnet abrasive. Read More

The cutting power of water cutting comes from two aspects: one is high-pressure water, and the other is abrasive added in water. It is not a problem to cut diamond with high pressure and abrasive.The nozzle of the nozzle has a small diameter and is generally made of cemented carbide. And the inner w Read More

A good waterjet garnet sand should meet the following conditions:(1) No plug;(2) Garnet has deep color, high iron and aluminum content, high hardness, fast cutting speed, moderate cutting gap, and straight and smooth cutting surface;(3) No too fine particles and dust affect the cutting speed. Read More

1） Not clean washing, or even not washingSome production and processing enterprises in order to save costs in the water washing process, the amount of water is not enough or the water quality is very poor, or even no water washing, resulting in high mud content of the abrasive.2） Insufficient magnet Read More

The abrasive hardness required for water cutting is high. But high hardness abrasive is not only garnet, brown aluminum oxide also has high hardness. So why not use brown aluminum oxide in water jet cutting?1.The hardness is too high, not suitable for precision cutting.The hardness of Brown aluminum Read More

The quality evaluation of garnet water jet sand generally focuses on the following aspects: high hardness, clean and dust-free, uniform particles without larger or smaller particles, which ensure that the water jet can have a better cutting speed. In fact, in addition to the aspects of these product Read More

Garnet sand is one of the most economical and ideal abrasive for water cutting. It has good hardness and toughness, high efficiency as an abrasive, and the cleanliness of grinding parts is also better. It can produce good edges and corners in the process of grinding, it can be said that garnet sand Read More

Two factors that affect waterjet cutting speed were covered in previous articles, so there are two other considerations:3. Characteristics of processed materials The characteristics of the processing material are also the main factors affecting the speed of the jet. The test results and the analysis Read More

Water jet cutting machines are widely used in the industry for their excellent cutting characteristics such as high precision and zero pollution. However, during the cutting process, some operators found that the cutting precision of the cutting machine would be slightly different. Many people It is Read More