The abrasive hardness required for water cutting is high. But high hardness abrasive is not only garnet, brown aluminum oxide also has high hardness. So why not use brown aluminum oxide in water jet cutting?1.The hardness is too high, not suitable for precision cutting.The hardness of Brown aluminum Read More

The quality evaluation of garnet water jet sand generally focuses on the following aspects: high hardness, clean and dust-free, uniform particles without larger or smaller particles, which ensure that the water jet can have a better cutting speed. In fact, in addition to the aspects of these product Read More

Garnet sand is one of the most economical and ideal abrasive for water cutting. It has good hardness and toughness, high efficiency as an abrasive, and the cleanliness of grinding parts is also better. It can produce good edges and corners in the process of grinding, it can be said that garnet sand Read More

Garnet sand is widely used in the water jet industry. It can be said that garnet sand drives the development of the water jet industry. The general water jet can only cut soft objects because the cutting force is too small, so its application field is very limited. When garnet sand is added to the w Read More

Garnet sand as a kind of natural abrasive, always be used in waterjet cutting. But the particle size will greatly affect the efficiency and quality of cutting.1. When large-particle water jet sand is used for cutting, the cutting surface is rough, the cutting gap is large, and the cutting precision Read More

Two factors that affect waterjet cutting speed were covered in previous articles, so there are two other considerations:3. Characteristics of processed materials The characteristics of the processing material are also the main factors affecting the speed of the jet. The test results and the analysis Read More

Water jet cutting is divided into pure water cutting and water jet sand cutting. Both belong to water jet cutting. What is the difference between the two?1. Different objectsThere is no water jet sand pipe inside the pure water jet machine, which is mainly used for cutting softer and lighter materia Read More

Unclean waterjet sand is prone to the phenomenon of sand pipe plugging. Generally, water-cutting sand with a large dust content, if the sand is damp, it is easy to produce agglomeration of soil or dust in the sand, which is easy to block the head and prevent the water from flowing out. Read More

Garnet sand is widely used in the field of water jet. The application of garnet sand makes water jet cutting more perfect and more efficient. This is also the reason why water jetting stands out among many cutting methods, and is now widely used in industry and used in more and more fields. Read More