A good waterjet garnet sand should meet the following conditions:(1) No plug;(2) Garnet has deep color, high iron and aluminum content, high hardness, fast cutting speed, moderate cutting gap, and straight and smooth cutting surface;(3) No too fine particles and dust affect the cutting speed. Read More

Dust-free garnet sand can penetrate into holes and uneven parts for cleaning, and thoroughly remove scale, rust, soluble salt and other dirt. The sandblasted surface has no embedded objects, no adverse bumps and pits. It is easy to obtain a higher sandblasting grade of Sa3, with a surface roughness Read More

As is known to all, ordinary steel usually goes through the process of sand blasting and derusting before use, which can remove rust, oxide scale and other sundries. Before pickling and passivation, stainless steel will also undergo sandblasting to clean the surface, remove the possible oil stains o Read More

It is very important to clear the road markings, such as the yellow zebra crossing, in the aspect of traffic, because it is not completely clear. In the light at night or in a humid environment, it is easy for drivers to think that the old markings still exist, which misleads the drivers and is very Read More

Garnet sand is a commonly used natural abrasive. It has excellent sand blasting effect and less dust. Once it appears, it has been favored by more industries. It is also widely used in the field of iron sand blasting. Due to different uses, iron parts need different treatment before use. Before pain Read More

Many water cutting manufacturers will have the phenomenon of sand pipe plug in the operation process, which is caused by the uncleanness of garnet sand. If the garnet sand cleaning process is not up to the standard, the dust and soil in the sand will tend to solidify into a mass once it is damp, whi Read More

Compared with other cutting methods, water jet cutting appears later and belongs to a new type of cutting method. With its advantages of high precision and zero pollution, it is used more and more widely. In the actual use of the water jet, there are many factors that affect the cutting effect. Many Read More

Although garnet sand is a necessary abrasive for sand blasting, its requirements are very high, and the chloride content of garnet sand is an important item. Why? First, let's see what chloride is. Chloride is a salt compound formed by the combination of negatively charged chloride ions and positive Read More

Read More

Garnet is a natural abrasive with relatively high hardness, which is widely used in water cutting and sandblasting industries. So can garnet abrasives be reused in water cutting?1. The garnet abrasive acts on the surface of the cutting object through a high-pressure jet flow. While cutting the objec Read More