1. Observing the color, the main colors of garnet sand are pink, light red, and deep red, with the redder the better. You can also rub it with your hands to observe the degree of weathering of garnet sand. Generally, good garnet sand has high hardness and is not easy to pulverize.2. Take an equal am Read More

Traditional cleaning processes may be banned in the near future because of the hazards they pose to the environment.As a nontraditional cold working technology, waterjet cutting has no heat effects, offers high flexibility, is environmentally friendly and is easy to operate. Water is one of the most Read More

Virtually every abrasive known to man — both natural and synthetic — has been considered for use in waterjet cutting. Almandine garnet has emerged as the mineral with the best characteristics for abrasive waterjet. Other minerals may be harder, heavier or lower in cost, but almandine garnet is the a Read More

A waterjet can be seen as an accelerated, controlled erosion process. A pure water waterjet (one without abrasives) is ideal for very soft materials such as rubber, foam, or food products. When abrasive is added, virtually anything can be cut or eroded away. By adding abrasive, you can greatly enhan Read More

Reason 1: Adding too much sand resulted in blockage and inability to pressurize.Solution: The amount of sand added should be appropriate and not too much.Reason 2: The spray gun is blocked.Solution: After stopping the gas flow, remove the nozzle and check for any foreign objects. If there are any fo Read More

Sa0: Steel surface without rust removal treatment.Sa1: Mild sandblasting to remove loose black skin, floating rust, and foreign objects.Sa 2: Moderate sandblasting removes most of the black skin, rust, and external foreign objects, resulting in a metallic gray surface after treatment. It is suitable Read More

SEPPE's Garnet grains clean deep into the cavities and pitted areas down to the bare metal, thoroughly removing all rust, soluble salts and other contaminations. The blasted surface is free of embedment and free of rogue peaks and troughs. SA3 White Metal is effortlessly achieved. A surface profile Read More

Why is alluvial garnet becoming more and more popular?Alluvial river garnet sand is native to freshwater riverbeds and has a more rounded and fuller surface under the force of freshwater over time. It is used in water cutting to better protect the cutting surface, and it creates a smoother cutting s Read More

The quality of garnet sand has a great impact on the efficiency of waterjet cutting and sandblasting. The use of high quality garnet sand can achieve an increase in cutting and blasting efficiency, which in turn saves various costs such as water, electricity and labor. Relatively speaking, pink garn Read More

For garnet sand, whether it is sandblasting for rust removal in life or in industry, it is indispensable to be used as abrasive. But not all garnet sand can be used as sandblasting abrasive. Sandblasting has more requirements for garnet sand, and the most important one is chloride content. Read More