Many water cutting manufacturers will have the phenomenon of sand pipe plug in the operation process, which is caused by the uncleanness of garnet sand. If the garnet sand cleaning process is not up to the standard, the dust and soil in the sand will tend to solidify into a mass once it is damp, whi Read More

Compared with other cutting methods, water jet cutting appears later and belongs to a new type of cutting method. With its advantages of high precision and zero pollution, it is used more and more widely. In the actual use of the water jet, there are many factors that affect the cutting effect. Many Read More

1） Not clean washing, or even not washingSome production and processing enterprises in order to save costs in the water washing process, the amount of water is not enough or the water quality is very poor, or even no water washing, resulting in high mud content of the abrasive.2） Insufficient magnet Read More

If there are too many impurities, there will be abnormal color spots or spots on the abrasive jet surface, and the surface is not smooth;The roughness of the abrasive sprayed surface will be uneven. If anti-corrosion coating is required in the later stage, the adhesion of the coating will be uneven, Read More

Coarse particle size:In order to speed up production or reduce costs, some manufacturers deliberately use oversized screens or are unwilling to stop production regularly to replace screen accessories (resulting in excessive wear of the screen and coarsening of the diameter), which makes the particle Read More

When choose a good garnet abrasive, the user must first think of the fact that garnet is a natural abrasive. The process of processing garnet abrasives is the same for all manufacturers. Any missing or insufficient segment will lead to the decline of quality. The production costs of crushing, screen Read More

1.Excellent surface cleaning effectIt can penetrate deep into holes and uneven parts, and completely remove scale, rust, soluble salt and other dirt. After sandblasting, there are no embedded objects, no unfavorable protrusions and pits, and it can easily obtain the highest cleaning level of SA3. Th Read More

In sandblasting, an important indicator that is often detected is electrical conductivity, that is, the electrical conductivity of the object. This is to detect the soluble salt content of the object after blasting. Soluble salts are a potential threat to objects being blasted. It affects the coatab Read More

Garnet is an island-like aluminum (calcium) silicate, which can be divided into two main categories: alumina and calcium oxide. The chemical composition of garnet varies greatly. The general chemical formula is A3B2[SiO4]3, where A represents cations such as divalent calcium, magnesium, iron, and ma Read More

1. River garnet has less salt than sea garnet. River garnet originates from freshwater riverbeds and contains lower salt content, which is reflected in better blasting effect and can effectively increase the effect of coating bond.2. River sand has less chlorine content than sea sand. The amount of Read More