Conductivity testing estimates water-soluble ionic contamination in a blasting-abrasive extract. It does not identify individual ions or assess waterjet feed stabili Read More

Washing, magnetic separation, screening and product purity directly affect garnet abrasive performance. Learn what problems to identify before purchasing or conducting a comparative trial. Read More

It is very important to clear the road markings, such as the yellow zebra crossing, in the aspect of traffic, because it is not completely clear. In the light at night or in a humid environment, it is easy for drivers to think that the old markings still exist, which misleads the drivers and is very Read More

Waterjet garnet should be assessed through batch evidence, its condition on arrival and controlled cutting results. Colour and rinse-water clarity are only preliminary observations. Read More

Garnet is a durable filter media. But like all consumables, it doesn't last forever. Knowing when to replace it saves you money and keeps water quality consistent.Under normal operating conditions – municipal or industrial water treatment with regular backwashing – SEPPE garnet typically lasts 3 to Read More

When buying blasting abrasives, most people focus on the cost value or surface finish. But workshop managers know that storage and handling quietly eat into efficiency — dust, clogs, and moisture damage cost real time and money. Three hidden problems with ordinary abrasives Dust——Pouring cheap slag Read More

When garnet sand is used for sandblasting, it can reach the highest cleaning level, which can greatly prolong the life of sandblasting surface coating, and there is almost no dust in the process of operation, which will not pollute the environment and affect the health of workers.By the impact of hi Read More

Reason 1: Adding too much sand resulted in blockage and inability to pressurize.Solution: The amount of sand added should be appropriate and not too much.Reason 2: The spray gun is blocked.Solution: After stopping the gas flow, remove the nozzle and check for any foreign objects. If there are any fo Read More

Many water cutting manufacturers will have the phenomenon of sand pipe plug in the operation process, which is caused by the uncleanness of garnet sand. If the garnet sand cleaning process is not up to the standard, the dust and soil in the sand will tend to solidify into a mass once it is damp, whi Read More